The relationship between the technical parameters of the generator set and the best balance, the main parameters are: server speed, server current, feeding speed, granulation speed, melt working pressure, melt temperature, zone temperature, server speed and electricity The flow rate is not immediately correlated, but the higher the speed, the corresponding reduction in electrical loss. Twin-screw manufacturers generally use semi-starvation feeding, so the size of the feed is immediately related to the extrusion manufacturing capacity. The melt temperature is basically the specific temperature of the material; the zone temperature is different from the specific material temperature, generally 5-20 degrees. This is due to the difference between the temperature measurement camera and the material touch.
The server speed, feeding speed and zone temperature settings are better matched and balanced to maximize the extrusion efficiency and complete high-quality and high-volume products. (At the same time, considering the composition of the extruder screw components). The difference between the small model and the large model: the small model extruder has a small screw diameter, and the plastic extruder has a small cavity on the inner wall of the screw and the barrel, high heat conduction and heat removal efficiency, and material dispersion.
